If you wish to install the drivers, software and firmware please visit this link and download the appropriate version for you computer:
New Firmware/Software (GUI): SimpleBGC_GUI_2_41b5
Drivers: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
Manual: SimpleBGC_32bit_manual_2_41_eng
Mac Users:
You can now use the software on Mac. Make sure to download the GUI for your mac from the link above as well as install the Mac OSX driver from the page below. Without the proper driver the usb connection will not work.
Also, sometimes the order matters for connecting to a Mac.
1) Turn on your Ghost
2) Plug it in with usb
3) Open the GUI Software (must be closed before you plug in your Ghost) – should say SimpleBGC_GUI.jar
4) Then you can select the appropriate connection (/dev/tty…) and hit connect.
For more instructions related to the Ghost please check out our Instructional Videos. We are trying to constantly add more instructional videos to make the operating and adjusting of the Ghost as simple as possible.
If your questions are not answered in either place please refer to the FAQ page
If your questions are still not answered you can view the ongoing conversations in our Forum and ask your own question if it’s not covered already.